It is common for inflatable products to break. So when you encounter a broken zorb ball, you don't need to be nervous, you just need to repair it in the right way.
Steps to repair a zorb ball
1. The first step to fix an inflatable zorb ball is to find out where the breakage is. First you need to check the air valve. Use an inflatable pump to fully inflate the product, then open the air valve and pour a small amount of water into the air valve to see if it bubbles up. If there are bubbles, it is because the air valve is not properly secured, so air is leaking. Simply unscrew the air valve and then screw it back in (be careful not to twist it).
2. If the air valve is not leaking, it may be that the zorb ball is cracked and has small holes. The relatively large size of the product after inflation makes it impossible to check the product by immersing it in water. Therefore, you should first inflate the product with an inflator pump (try to fill it up a little, if the expansion is not enough, you can have another person press the zorb ball by hand). Then test in order. Based on past experience, the bottom has a higher likelihood of being punctured by a sharp object. You can test from the bottom first, then from the side, and then to the surface. Gently move your hand about 1cm from the surface of the zorb ball and if you move your hand to the broken area, your hand will visibly feel air squirting out. Then memorize the air leak (you can make a small mark with a pen).
3. After finding the air leak, the next step is to repair it, which is relatively simple. First, you should deflate the zorb ball, then you should use repair glue and use 1-2 drops of glue at the crack. You need to wait 2 hours for the glue to dry naturally. If the hole in the zorb ball is relatively large, use a matching patch to cut out a small piece (just to cover the hole), apply glue to the top of the cut out patch, and clean the hole. Finally, apply the patch to the hole to cover it. After the glue dries naturally, it is ready.
4. After the glue dries, you can inflate the zorb ball and use it. If you still find that your zorb ball is leaking air, there should be other cracks besides the one you have repaired, then deflate it, recheck and follow the steps you learned above!
Where to buy high quality zorb balls
If you are interested in high quality zorb balls, then Kameymall is your best choice for zorb balls.